by HeyheyL | Dec 11, 2025 | 0,05 - 0,5°dH, 0,25 - 2,5°dH, 1,00 - 10,00°dH, 2,5 – 50°dH, 2,50 - 25,00°dH, Analyzer, Application, Boiler houses, Drinking water supply, Food industry, Galvanization, Limit value, Osmosis systems, Parameters, Product, Water softening, Water treatment
The Testomat® Limit TH process photometer automatically determines and monitors automatically the content of residual total hardness (water hardness) in water. It will provide you with a lot of new functions additionally to the approved functions of the Testomat 808®...
by HeyheyL | Mar 18, 2024 | Analyzer, Application, Boiler houses, Calcium hardness, Cooling towers, Food industry, Measuring value, Parameters, Product
The Testomat® PRO CA self clean process meter automatically determines and monitors the calcium hardness in water by titration. It will provide you with a lot of new functions additionally to the approved functions of the Testomat series which are: integrated SD card,...
by HeyheyL | Dec 2, 2021 | 0,05 - 0,5°dH, 0,25 - 2,5°dH, 1,00 - 10,00°dH, 2,50 - 25,00°dH, Analyzer, Application, Boiler houses, Drinking water supply, Measuring converter, Parameters, Product, Water hardness, Water softening, Water treatment
The measuring converter Testomat® Modul TH-R is an analysis instrument that is used to determine and monitor residual total hardness (water hardness) via titration and photoelectric evaluation. The Testomat® Modul TH then transmits the measurement result to the...
by HeyheyL | Mar 19, 2020 | 0,05 – 2,00°dH, Analyzer, Application, Boiler houses, Carbonate hardness (alkalinity), Decarbonisation, Measuring value, Parameters, Product
Titromat® M2 is used for automatically determining and monitoring the alkalinity for low hardness measuring ranges. Application corrosion monitoring in boiler feed water,residual alkalinity after decarbonization (e.g., breweries) Measuring range 0.05 – 2.00 °dH...
by HeyheyL | Mar 19, 2020 | 0,05 - 1,00°dH, Analyzer, Application, Boiler houses, Carbonate hardness (alkalinity), Decarbonisation, Measuring value, Parameters, Product
Titromat® M1 is used for automatically determining and monitoring the alkalinity for low hardness measuring ranges. Application corrosion monitoring in boiler feed water,residual alkalinity after decarbonization (e.g., breweries) Measuring range 0.05 – 1.00 °dH...
by HeyheyL | Mar 19, 2020 | Analyzer, Application, Boiler houses, Cooling towers, Measuring value, Parameters, Phosphate, Product, Sewage treatment, Water treatment
The process photometer Testomat 2000® PO4 is a robust wet-chemical online monitor for monitoring the phosphate content from 0 to 10 mg/l (ppm) using the photometric analysis principle. Application Process water monitoringProduction water purificationWastewater...
