Testomat® Modul Reagents

The bottles can be used immediately in the instrument without cumbersome filling and refilling. Find the safety data sheets in our download section. These reagents are suitable for use in the Testomat® Modul Cl: ReagentsParameterMeasuring rangeChlor reagent set Ttotal...

Service set Testomat® Modul CL

This service set contains all the spare parts you need for the regular maintenance of a Testomat® Modul CL or Testomat® Modul NH2CL device. Content • 1 x Set of seals T2000• 2 x Sight glasses 30×3• 1 x Flow controller valve body• 3 x Plugs for measuring chamber•...

Service set Testomat® Modul TH

This service set contains all the spare parts you need for the regular maintenance of a Testomat® Modul TH unit. Content • 1 x Set of seals T2000• 2 x Sight glasses 30×3• 1 x Flow controller valve body• 3 x Plugs for measuring chamber• 2 x Screw cap with insert...

PC Interface for Inductive Probe CTI 500

The interface is required for programming the CTI 500 inductive probe on the MultiControl CT.

Inductive Probe CTI 500

The inductive probe is suitable for use in the MultiControl CT. Technical Data Inductive probe for the conductivity measurementfor all measuring converters with 20 mA outputfully programmable in the range from 500 µS/cm to 2000 mS/cmthe PC interface (Item no. 310133)...

Plug-in Card for BKEX probe

The plug-in card must be plugged into the MultiControl CT when the BKEX probe is used for conductivity measurement.