The process photometer Testomat 2000® Polymer is a robust wet-chemical online monitor for monitoring the content of anionic polyacrylate from 0 to 50 mg/l (ppm) (with the factor set to 1.00) using the photometric analysis principle.

 


Application

  • monitoring of conditioning agents in cooling and heating circuits

 

Measuring range

customer specific e.g. 0.0-50.0 mg/l
(resolution 0.1 with factor 1)

It is neccessary to customize the Testomat 2000® Polymer because of the large amount of polyacrylats, which can be measured with this unit. Either use your existing reagents or use our new polymer reagents.

 

Technical Data

Power supply: 230–240 VAC, 115 VAC, 24 VAC all 50–60Hz
Power consumption: max. 30 VA
Protection class: I
Degree of protection: IP 65
Ambient temperature: 10–45 °C, 50 – 104°F
Dimensions (B x H x T): 380 x 480 x 280 mm
Weight: approx. 9.5 kg
Menu languages: German, English

 

Mains water supply

Operating pressure:
1 to 8 bar (15 to 116 psi) or
0,3 to 1 bar (5 to 15 psi), after removing of the valve body out of the regulator/filter housing
Water inlet: Opaque hose with 6 mm external diameter/4 mm internal diameter
Water outlet: Hose with 6 mm external diameter/4 mm internal diameter
Water temperature: 10 to 40 °C; 50 to 104°F

Here you will find available reagents for the Testomat 2000® Polymer.
Select accessories in the product search to find e.g. pumps, filters and service sets for the Testomat 2000® Polymer.