Service case for regular maintenance of a Testomat 2000® or Titromat® device.
Content
Variant 1:
- 10 20×2 O-rings
- 10 10.82×1.78 O-rings
- 5 4.47×1.78 O-rings
- 5 18×2 EPDM O-rings
- 20 24×2 flat gaskets
- 5 x filter screen for inlet, 19.5dx25
- 5 flow regulator cores
- 2 springs for inlet
- 10 stoppers for measuring chamber
- 6 fuses, T 0.08A
- 6 fuses, T 0.1 A
- 6 fuses, T0.16 A
- 6 fuses, T 0.2 A
- 6 fuses, T 0.315 A
- 6 fuses, T 1.0 A
- 6 fuses, M4A
- 20 30×3 sight glasses
- 3 screw caps with T2000 insert
- 4 M3x40 screws
- 1 suction hose
- 1 pressure hose
- 6 different pipes
- 1 cleaning brush set
- 2 push-in angle joints
- 2 magnetic stirring bars
Variant 2:
- 4 20×2 O-rings
- 4 10.82×1.78 O-rings
- 2 4.47×1.78 O-rings
- 2 18×2 EPDM O-rings
- 4 24×2 flat gaskets
- 2 x filter screen for inlet, 19.5dx25
- 2 flow regulator cores
- 2 springs for inlet
- 6 stoppers for measuring chamber
- 1 push-in connector for the drain hose
- 2 fuses, T 0.08A
- 2 fuses, T 0.1 A
- 2 fuses, T0.16 A
- 2 fuses, T 0.2 A
- 2 fuses, T 0.315 A
- 2 fuses, T 1.0 A
- 2 fuses, M4A
- 4 30×3 sight glasses
- 3 screw caps with T2000 insert
- 2 M3x40 screws
- 2 suction hose
- 2 pressure hose
- 6 different pipes
- 1 cleaning brush set
- 2 push-in angle joints
- 2 magnetic stirring bars
- 2 valve sets for dosing pump
- 1 inlet connection
- 1 screw-in connector G1/4″-6
- Angled plug-in connector G 1/8″